显微镜箱细胞培养系统 显微镜箱细胞培养系统,显微镜温厂家报价/

生物论坛 生物仪器设备

  显微镜箱细胞培养系统,显微镜环境控制箱,用于控制显微镜观察台的温度、湿度、气体浓度保持恒定的状态,以进行长时间动态细胞观察。   我们可以为各种品牌的显微镜定制专业的显微镜环境控制系统。详情请来电咨询。   Complete systems include • Microscope enclosure • Stage top climate chamber • Temperature controller with air heater • Gas controller (CO2, O2, or dual CO2/O2) • Humidity module • Touch screen interface • Smart box (optional) • Obscuring panels (optional) • Filter box (optional)   Bold Line Microscope Enclosure A controlled environment all around the microscope. The CO2 Microscope Cage Incubator is designed to maintain the required environmental conditions for cell culture around your microscopy workstation, enabling prolonged observations on biological specimens and allowing space for other equipment. Cells cultured within the microscope cage incubator have been shown to proliferate as well as in a regular bench-top incubator. Models for any inverted and upright microscope are available. A wide choice of chambers and interchangeable plate adapters allow the use of any cell culture support (petri, glass slides, multiwell plates, and others). Compatible with manual and digital CO2 / O2 gas controllers.   Easy 'turn-to-open' assembly 'Turn-to-open' hinges permit direct removal of both the front and upper panel. Once these panels have been removed, the rest of the cage incubator can be easily moved backwards. When needed, the cage incubator can be reassembled in five minutes.   Full accessibility Several doors on the front and side panels allow full and easy access to the microscope. In particular, two openings on the bottom of the front panel provide unrestricted access to the focus knob. Additional doors can be added upon request.   Obscuring Panels Obscuring panels can be assembled with the cage by means of turn to open hinges to create a darkeded environment for fluorescence experiments.   Temperature Controller - H201 T UNIT BL The H201 T UNIT BL is the temperature controller used with the cage incubator, it includes the air heater, and requires the Oko-Touch for operation. The controller keeps the specimen at the desired temperature by maintaining the temperature of the air blown into the enclosure. A filter box can be attached to the air heater to guarantee that the recycled air is dust and bacteria free. Temperature precision is 0.1°C from 3°C above ambient to 40°C. The air heater has a double inlet and outlet to recycle the heated air. Flow rate and temperature sensors are continuously monitored and allow fast start- up and stable gradient free operation during the experiment. Air flow rate and temperature are set using the OKOTouch.   Specimen / Cage Temperature feedback operation There are two ways to operate the system depending on which temperature sensor is used to provide feedback to the H201 - T UNIT BL. In the specimen feedback mode, feedback is provided by a sensor placed inside the climate chamber near the specimen. Simple manipulation is required to attach the thermocouple into the reference well with adhesive tape. In the enclosure feedback mode the sensor is measuring the temperature of the air inside the enclosure. 您想了解更多详细资料吗? 请与我们联系: TEL: 021-35183767 , 18502129044 QQ : 2113136797 Mail: yuyan0317@126.com   敬请来电咨询! 

相关文章
评论留言